Research Article

Mixed Convection in A Square Cavity with Heat-Generating Conducting Body

Authors

  • Victoria Nozick * Departmant of Operations and Information Management Group, Aston Business School, Aston University, B4 7ET Birmingham, United Kingdom.
  • Omar Mar Cornelio Centro de Estudio de Matemática Computacional, Universidad de las Ciencias Informáticas, 19370 La Habana, Cuba.

https://doi.org/10.48313/mtei.v2i2.43

Abstract

In this research, a steady mixed convection in a square cavity with a heat-generating conducting body is investigated, where the bottom wall is kept at a constant high temperature of Th and the top wall is kept at a constant low temperature of Tc, respectively. The left and right side walls are assumed to be insulated. The inlet port of cold air is located on the bottom of the left wall. The fluid properties are assumed to be constant, except for the density in the buoyancy term, which follows Boussinesq’s approximation. Continuity, momentum, and energy equations are solved by using a finite volume method and SIMPLE algorithm in which convection terms are applied by using the Power-Law scheme. Results have been compared with published results for two similar cases, where a good agreement is achieved. Positioning the outlet ports at three locations on the right wall for Re = 20, 100, and 300, Ri = 0, 0.5, 1, and 10, and Pr = 0.7, where a total of 36 cases were studied. Results have shown that, for a configuration where the exit port is located at the top of the right wall, and the solid body is situated on the genuine route of the fluid flow from inlet to outlet, cooling of the heat-generating body is optimum. For this case, the vorticity region around the body decreases, where the hot body comes in contact with the incoming cold air jet, decreasing the temperature.

Keywords

Mixed convection Square cavity Heat-generating conducting SIMPLE algorithm
References (12)
  1. [1] Papanicolaou, E., & Jaluria, Y. (1991). Mixed convection from an isolated heat source in a rectangular enclosure. Numerical heat transfer, 18(4), 427–461. https://doi.org/10.1080/10407789008944802

  2. [2] Karki, K. C., Sathyamurthy, P. S., & Patankar, S. V. (1992). Natural convection in a partitioned cubic enclosure. Journal of heat transfer, 114(2), 410–417. https://doi.org/10.1115/1.2911289

  3. [3] Prasad, A. K., & Koseff, J. R. (1996). Combined forced and natural convection heat transfer in a deep lid-driven cavity flow. International journal of heat and fluid flow, 17(5), 460–467. https://doi.org/10.1016/0142-727X(96)00054-9

  4. [4] Hsu, T. H., Hsu, P. T., & How, S. P. (1997). Mixed convection in a partially divided rectangular enclosure. Numerical heat transfer, part a applications, 31(6), 655–683. https://doi.org/10.1080/10407789708914058

  5. [5] Lee, S. C., Cheng, C. Y., & Chen, C. K. (1997). Finite element solutions of laminar and turbulent flows with forced and mixed convection in an air-cooled room. Numerical heat transfer, part a applications, 31(5), 529–550. https://doi.org/10.1080/10407789708914051

Article Metrics

How to Cite

Nozick, V. ., & Mar Cornelio, O. . (2025). Mixed Convection in A Square Cavity with Heat-Generating Conducting Body. Mechanical Technology and Engineering Insights, 2(2), 105-120. https://doi.org/10.48313/mtei.v2i2.43

Similar Articles

1-10 of 55

You may also start an advanced similarity search for this article.