Research Article

Particle Swarm Optimization-Based PID Control for Position Tracking of Nonlinear Hydraulic Servo Systems

Authors

  • Ali Jamali * Department of Engineering, RMIT University, Melbourne, Australia.
  • Mojtaba Malekee Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Guilan, Rasht, Guilan, Iran.

https://doi.org/10.48313/mtei.v1i3.59

Abstract

Nonlinearity is inherent in hydraulic servomechanisms, as the flow rate-system pressure relationship is complex, and nonlinear friction and the fluid bulk modulus further complicate the system. This study aims to present an optimal Proportional-Integral-Derivative (PID) control method for the angular positioning of a hydraulic servo motor based on the Particle Swarm Optimization (PSO) technique. To improve the controller’s performance, an optimized multi-objective cost function is proposed that combines Integral Squared Error (ISE), maximum overshoot, and steady-state error criteria. An extensive nonlinear mathematical model of the hydraulic servo mechanism is designed and simulated in MATLAB/Simulink. Optimal PID parameter tuning using the PSO algorithm involves a swarm of 300 particles over 30 iterations. The simulation results show that the developed control scheme exhibits fast, accurate tracking of the reference signals without overshoot or oscillation. It takes approximately 4 seconds to track the shaft reference of the motor while maintaining tracking and system stability. This issue demonstrates the efficiency of the developed PSO-based PID controller for compensating nonlinearity without a nonlinear gradient technique. This technique offers a suitable control algorithm that requires fewer computing resources than other control techniques in the industrial application field, where the hydraulic servomechanism operates under nonlinear dynamics. 

Keywords

Particle swarm optimization Hydraulic Jack Nonlinear dynamics Proportional-integral-derivative controller Position control
References (13)
  1. [1] Bobrow, J. E., & Lum, K. (1996). Adaptive, high bandwidth control of a hydraulic actuator. Journal of dynamic systems, 118(4), 714–720. https://doi.org/10.1115/1.2802347

  2. [2] Chern, T. L., & Wu, Y. C. (1991). Design of integral variable structure controller and application to electrohydraulic velocity servosystems. IEE proceedings d (control theory and applications) (Vol. 138, pp. 439–444). IET. https://doi.org/10.1049/ip-d.1991.0060

  3. [3] Fung, R. F., & Yang, R. T. (1998). Application of VSC in position control of a nonlinear electrohydraulic servo system. Computers & structures, 66(4), 365–372. https://doi.org/10.1016/S0045-7949(97)00084-9

  4. [4] Vossoughi, G., & Donath, M. (1995). Dynamic feedback linearization for electrohydraulically actuated control systems. Journal of dynamic systems measurement and control, 117(4), 468–477. https://doi.org/10.1115/1.2801102

  5. [5] Aly, A. A. (2004). Modeling and control of an electro-hydraulic servo motor applying velocity feedback control strategy. International mechanical engineering conference, IMEC (pp. 335–342). IMEC2004. https://d1wqtxts1xzle7.cloudfront.net/35580054/Pap7_Hydraulic_vel_feedback_control-libre.pdf?1416054121

Article Metrics

How to Cite

Ali Jamali, & Malekee, M. . (2024). Particle Swarm Optimization-Based PID Control for Position Tracking of Nonlinear Hydraulic Servo Systems. Mechanical Technology and Engineering Insights, 1(3), 160-169. https://doi.org/10.48313/mtei.v1i3.59

Similar Articles

1-10 of 56

You may also start an advanced similarity search for this article.