Research Article

The Application of Teflon Sleeves in Industrial Ball Valves

Authors

  • Sahar Hatami Pour * Department of Industrial Engineering, Ayandegan University, Tonekabon, Iran.
  • Fatemeh Zahra Montazeri Department of Industrial Engineering, Ayandegan University, Tonekabon, Iran.

https://doi.org/10.48313/mtei.v2i2.41

Abstract

Given the extensive applications of ball valves in the oil, gas, and petrochemical industries, refineries, and chemical plants, primarily due to their negligible pressure drop, increasing the lifespan and operational quality of these valves is of significant importance. The most critical component of these valves is the ball, which must be manufactured with extremely high precision. Considering that the ball material in these valves is typically hardened steel with specific finishing and plating, sour gas and the passing fluid lead to corrosion and a reduction in the service life of these industrial valves. In this paper, the proposal to use a Teflon sleeve for the ball of these valves is presented. To reduce the manufacturing cost of the Teflon sleeve and prevent it from entering a plastic state, the minimum thickness of the sleeve has been determined using the Finite Element Method (FEM) within the commercial software Analysis System (ANSYS) Workbench under specific operating conditions. In this regard, although thermal properties affect the mechanical behavior of the Teflon sleeve material, this influence has been neglected. This idea will lead to an increased lifespan, a reduction in the final cost, and a decrease in the valve's weight.

Keywords

Finite element Ball valve Numerical simulation Teflon sleeve
References (14)
  1. [1] Zhang, S. C., Zhang, Y. L., & Fang, Z. M. (2012). Numerical simulation and analysis of ball valve three-dimensional flow based on CFD. IOP conference series: earth and environmental science, 15(5), 52024. https://doi.org/10.1088/1755-1315/15/5/052024

  2. [2] Chern, M. J., Wang, C. C., & Ma, C. H. (2007). Performance test and flow visualization of ball valve. Experimental thermal and fluid science, 31(6), 505–512. https://doi.org/10.1016/j.expthermflusci.2006.04.019

  3. [3] Skousen, F. L. (2011). Valve handbook. McGraw-Hill Education Ltd. https://www.amazon.nl/-/en/Valve-Handbook-3rd-Philip-Skousen/dp/0071743898

  4. [4] Zienkiewicz, R. L., & Taylor, J. Z. Z. (2005). The finite element method: Its basis and fundamentals. Butterworth-heinemann. https://shop.elsevier.com/books/the-finite-element-method-its-basis-and-fundamentals/zienkiewicz/978-0-08-047277-5#full-description

  5. [5] Clarhed, D. (2008). Stress analysis of PTFE sleeves in industrial valves [Thesis].

Article Metrics

How to Cite

Hatami Pour , S., & Montazeri, F. Z. (2025). The Application of Teflon Sleeves in Industrial Ball Valves. Mechanical Technology and Engineering Insights, 2(2), 82-93. https://doi.org/10.48313/mtei.v2i2.41

Similar Articles

1-10 of 56

You may also start an advanced similarity search for this article.