Numerical Study on the Influence of Internal Corrosion on Flow Characteristics and Pressure Drop in Water Transmission Pipes

Authors

  • Nayer Ali Dorostan * Department of Energy Conversion Group, Dezful Branch, Islamic Azad University, Dezful, Iran.
  • Mehrdad Javadi Department of Mechatronics, South Tehran Branch, Islamic Azad University, Tehran, Iran. https://orcid.org/0000-0001-6328-1063

https://doi.org/10.48313/mtei.v1i2.50

Abstract

The impact of internal corrosion and rust formation in water transmission pipes is very important for hydraulic properties, flow structure, and energy losses. The current work analyzes streamlines, velocity distribution, vortex generation, and pressure coefficient changes as functions of varying degrees of internal corrosion in water transmission pipes using Computational Fluid Dynamics (CFD). CFD simulations were performed for different corrosion cases characterized by varying levels of area reduction. The Reynolds-Averaged Navier–Stokes (RANS) equations were solved in ANSYS Fluent using the finite volume method, and the Renormalization Group (RNG) k-ε turbulence model was used to account for turbulence and separated flow phenomena. Structured quadrilateral grid generation was performed in Gambit, and local grid refinement near walls and contraction areas was applied to enhance the accuracy of CFD computations. Good agreement between the CFD results and the experimental data of Eaton and Johnson on turbulent flow through a sudden expansion was obtained. From the findings, it is clear that an increase in corrosion intensity accelerates fluid flow in regions of constriction, creating high velocity and negative pressure gradients in downstream areas following the corroded parts. In addition, high levels of corrosion lead to flow separation, vortex formation, and extensive recirculation, resulting in greater hydraulic losses and pressure drop in the pipe system. From the pressure coefficient distribution plot, it is clear that severe corrosion leads to higher pressure drops in the pipe due to increased turbulence and energy losses.      

Keywords:

Internal corrosion, Computational fluid dynamics, Turbulent flow, Pressure drop, Water transmission pipe

References

  1. [1] Perry, A. E., Schofield, W. H., & Joubert, P. N. (1969). Rough wall turbulent boundary layers. Journal of fluid mechanics, 37(2), 383–413. https://doi.org/10.1017/S0022112069000619
  2. [2] Silberman, E. (1970). Effect of helix angle on flow in corrugated pipes. Journal of the hydraulics division, 96(11), 2253–2263. https://doi.org/10.1061/JYCEAJ.0002760
  3. [3] Silberman, E. (1980). Turbulence in helically corrugated pipe flow. Journal of the engineering mechanics division, 106(4), 699–717. https://doi.org/10.1061/JMCEA3.0002619
  4. [4] Chen, J. J. J., Leung, Y. C., & Ko, N. W. M. (1986). Drag reduction in a longitudinally grooved flow channel. Industrial & engineering chemistry fundamentals, 25(4), 741–745. https://doi.org/10.1021/i100024a044
  5. [5] Djenidi, L., Antonia, R. A., & Anselmet, F. (1994). LDA measurements in a turbulent boundary layer over a d-type rough wall. Experiments in fluids, 16(5), 323–329. https://doi.org/10.1007/BF00195431
  6. [6] Morales, R. E. M., Franco, A. T., Junqueira, S. L. M., & Erthal, R. H. (2007). Experimental analysis of turbulent flow in flexible pipes.
  7. [7] Hu, H., & Cheng, Y. F. (2016). Modeling by computational fluid dynamics simulation of pipeline corrosion in CO2-containing oil-water two phase flow. Journal of petroleum science and engineering, 146, 134–141. https://doi.org/10.1016/j.petrol.2016.04.030
  8. [8] Li, Q., Hu, H., & Cheng, Y. F. (2016). Corrosion of pipelines in CO2-saturated oil-water emulsion flow studied by electrochemical measurements and computational fluid dynamics modeling. Journal of petroleum science and engineering, 147, 408–415. https://doi.org/10.1016/j.petrol.2016.09.011
  9. [9] Pouraria, H., Seo, J. K., & Paik, J. K. (2016). A numerical study on water wetting associated with the internal corrosion of oil pipelines. Ocean engineering, 122, 105–117. https://doi.org/10.1016/j.oceaneng.2016.06.022
  10. [10] Kahyarian, A., Singer, M., & Nesic, S. (2016). Modeling of uniform CO2 corrosion of mild steel in gas transportation systems: A review. Journal of natural gas science and engineering, 29, 530–549. https://doi.org/10.1016/j.jngse.2015.12.052
  11. [11] Owen, J., Godfrey, J., Ma, W., de Boer, G., Al-Khateeb, M., Thompson, H., … & Barker, R. (2020). An experimental and numerical investigation of CO2 corrosion in a rapid expansion pipe geometry. Corrosion science, 165, 108362. https://doi.org/10.1016/j.corsci.2019.108362
  12. [12] Wang, W., Sun, Y., Wang, B., Dong, M., & Chen, Y. (2022). CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow. Energies, 15(5), 1694. https://doi.org/10.3390/en15051694
  13. [13] Zeng, L., Lv, T., Chen, H., Ma, T., Fang, Z., & Shi, J. (2023). Flow accelerated corrosion of X65 steel gradual contraction pipe in high CO2 partial pressure environments. Arabian journal of chemistry, 16(8), 104935. 10.1016/j.arabjc.2023.104935
  14. [14] Thorat, U., Jones, M., Woollam, R., Owen, J., Barker, R., Thompson, H., & de Boer, G. (2024). Computational fluid dynamics driven mass transfer model for the prediction of CO2 corrosion in pipelines. Journal of pipeline science and engineering, 4(1), 100148. https://doi.org/10.1016/j.jpse.2023.100148
  15. [15] Yang, H., Lu, L., Tsai, K., & Sidahmed, M. (2023). A hybrid physics and active learning model for cfd-based pipeline co2 and o2 corrosion prediction. International petroleum technology conference (p. D031S037R003). IPTC. https://doi.org/10.2523/IPTC-23049-EA
  16. [16] Cruz, D., Anbarlooei, H., Ramos, F., Santos, C., & Celis, G. (2023). On the attached eddy hypothesis and the turbulent friction factor of pipe flows with rough wall. Bulletin of the american physical society. https://meetings.aps.org/Meeting/DFD23/Session/G42.5
  17. [17] Wang, H., Li, Z., Zhang, Z., Wang, Y., Xu, Z., Fan, P., … & Yu, Q. (2023). The Relationship between the Flow Velocity of Freshwater and the Corrosion Performance of Steel Pipe Elbow Sections in Water Resource Allocation Engineering. Journal of materials engineering and performance, 32(11), 4941–4958. https://doi.org/10.1007/s11665-022-07432-w
  18. [18] Obaseki, M., Alfred, P. B., Elijah, P. T., & Okuma, S. O. (2023). Corrosion rate prediction in oil and gas pipelines based on multiphase flow modelling. International journal of engineering research in africa, 67, 27–48. https://doi.org/10.4028/p-brqaI1
  19. [19] Thangam, S., & Speziale, C. G. (1992). Turbulent flow past a backward-facing step-A critical evaluation of two-equation models. AIAA journal, 30(5), 1314–1320. https://ui.adsabs.harvard.edu/link_gateway/1992AIAAJ..30.1314T/doi:10.2514/3.11066

Downloads

Published

2024-06-10

Issue

Vol. 1 No. 2 (2024): Mechanical Technology and Engineering Insights (MTEI)

Section

Articles

How to Cite

Dorostan, N. A. ., & Javadi, M. . (2024). Numerical Study on the Influence of Internal Corrosion on Flow Characteristics and Pressure Drop in Water Transmission Pipes. Mechanical Technology and Engineering Insights, 1(2), 93-103. https://doi.org/10.48313/mtei.v1i2.50

Similar Articles

1-10 of 16

You may also start an advanced similarity search for this article.