Experimental Investigation of Energy Absorption Characteristics of Square Thin-Walled Aluminum Tubes under Folding and Splitting Deformation Modes

Authors

https://doi.org/10.48313/mtei.v1i4.72

Abstract

Thin-walled metal structures have been used extensively in energy absorption systems in various fields such as transport, aerospace, and protection engineering because of their excellent properties, particularly their high strength-to-weight ratios and high energy absorption performance. This paper experimentally evaluates the energy absorption behavior of square thin-walled aluminum tubes subjected to two different deformation behaviors: folding and splitting. The specimens used in all experiments were made of the same type of aluminum material. They had the same geometrical parameters, such as wall thickness, tube length, cross-sectional dimensions, and volume. The dynamic compressive tests were carried out on the specimen samples through the folding deformation method using the drop-hammer machine. The results of the experiment indicated that folding deformation has a better performance in terms of energy absorption capacity with a  Specific Absorbed Energy (SAE) value of 15,601.6 J/kg, which is 14.1% higher than that achieved through splitting. In addition, the average crushing force observed during the folding mode tests is about 45% higher compared to that recorded for the splitting deformation mode. On the other hand, the splitting mode yielded a considerably lower maximum force value but had a longer crushing displacement, making it more stable in its force-displacement response. The observations during deformation showed consistent diamond-shaped progressive folding deformation for folding samples, but curling without periodic folds in splitting samples. From the results obtained, it can be deduced that folding is better suited where maximum energy absorption capacity is the key objective. 

Keywords:

Thin-walled tubes, Energy absorption, Folding deformation, Splitting deformation

References

  1. [1] Zhang, X., Cheng, G., & Zhang, H. (2009). Numerical investigations on a new type of energy-absorbing structure based on free inversion of tubes. International journal of mechanical sciences, 51(1), 64–76. https://doi.org/10.1016/j.ijmecsci.2008.11.001
  2. [2] Bardi, F. C., Yun, H. D., & Kyriakides, S. (2003). On the axisymmetric progressive crushing of circular tubes under axial compression. International journal of solids and structures, 40(12), 3137–3155. https://doi.org/10.1016/S0020-7683(03)00111-2
  3. [3] Niknejad, A., Abedi, M. M., Liaghat, G. H., & Zamani Nejad, M. (2012). Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis. Materials & design, 37, 144–151. https://doi.org/10.1016/j.matdes.2011.12.032
  4. [4] Niknejad, A., Liaghat, G. H., Naeini, H. M., & Behravesh, A. H. (2010). Experimental and theoretical investigation of the first fold creation in thin walled columns. Acta mechanica solida sinica, 23(4), 353–360. https://doi.org/10.1016/S0894-9166(10)60036-5
  5. [5] Rosa, P. A., Rodrigues, J. M. C., & Martins, P. A. F. (2004). Internal inversion of thin-walled tubes using a die: Experimental and theoretical investigation. International journal of machine tools and manufacture, 44(7), 775–784. https://doi.org/10.1016/j.ijmachtools.2004.01.013
  6. [6] Niknejad, A., & Moeinifard, M. (2012). Theoretical and experimental studies of the external inversion process in the circular metal tubes. Materials & design, 40, 324–330. https://doi.org/10.1016/j.matdes.2012.04.005
  7. [7] Niknejad, A., Elahi, S. A., & Liaghat, G. H. (2012). Experimental investigation on the lateral compression in the foam-filled circular tubes. Materials & design (1980-2015), 36, 24–34. https://doi.org/10.1016/j.matdes.2011.10.047
  8. [8] Gupta, N. K., & Khullar, A. (1995). Collapse load analysis of square and rectangular tubes subjected to transverse in-plane loading. Thin-walled structures, 21(4), 345–358. https://doi.org/10.1016/0263-8231(95)93619-W
  9. [9] Elchalakani, M., Zhao, X. L., & Grzebieta, R. H. (2002). Plastic mechanism analysis of circular tubes under pure bending. International journal of mechanical sciences, 44(6), 1117–1143. https://doi.org/10.1016/S0020-7403(02)00017-6
  10. [10] Stronge, W. J., Yu, T. X., & Johnson, W. (1983). Long stroke energy dissipation in splitting tubes. International journal of mechanical sciences, 25(9), 637–647. https://doi.org/10.1016/0020-7403(83)90073-5
  11. [11] Alexander, J. M. (1960). An approximate analysis of the collapse of thin cylindrical shells under axial loading. The quarterly journal of mechanics and applied mathematics, 13(1), 10–15. https://doi.org/10.1093/qjmam/13.1.10
  12. [12] Al-Hassani, S. T. S., Johnson, W., & Lowe, W. T. (1972). Characteristics of inversion tubes under axial loading. Journal of mechanical engineering science, 14(6), 370–381. https://doi.org/10.1243/JMES_JOUR_1972_014_046_02
  13. [13] Mamalis, A. G., Johnson, W., & Viegelahn, G. L. (1984). The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: Some experimental results. International journal of mechanical sciences, 26(11), 537–547. https://doi.org/10.1016/0020-7403(84)90008-0
  14. [14] Abramowicz, W., & Jones, N. (1984). Dynamic axial crushing of square tubes. International journal of impact engineering, 2(2), 179–208. https://doi.org/10.1016/0734-743X(84)90005-8
  15. [15] Mamalis, A. G., Manolakos, D. E., Saigal, S., Viegelahn, G., & Johnson, W. (1986). Extensible plastic collapse of thin-wall frusta as energy absorbers. International journal of mechanical sciences, 28(4), 219–229. https://doi.org/10.1016/0020-7403(86)90070-6
  16. [16] Chirwa, E. C. (1993). Theoretical analysis of tapered thin-walled metal inverbucktube. International journal of mechanical sciences, 35(3), 325–351. https://doi.org/10.1016/0020-7403(93)90085-9
  17. [17] Aljawi, A. A. N., & Alghamdi, A. A. (2000). Inversion of frusta as impact energy absorbers. In Hassan, M. F. & Megahed, S. M. (Eds.), Current advances in mechanical design and production VII (pp. 511–519). Oxford: Pergamon. https://doi.org/10.1016/B978-008043711-8/50052-0
  18. [18] Alghamdi, A. A. A. (2001). Collapsible impact energy absorbers: an overview. Thin-walled structures, 39(2), 189–213. https://doi.org/10.1016/S0263-8231(00)00048-3
  19. [19] Gao, G., Lu, H., Sha, C., Ren, W., Zhong, Y., & Lei, Z. (2024). Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions. Composite structures, 330, 117833. https://doi.org/10.1016/j.compstruct.2023.117833
  20. [20] Isaac, C. W., & Oluwole, O. (2015). Finite element comparative analysis of the crushing behaviour of square steel tubes. International journal of scientific and engineering research, 6(7), 1650–1655. https://www.researchgate.net/profile/Leke-Oluwole/publication/281115417_Finite_Element_Comparative_Analysis_of_the_Crushing_Behaviour_of_Square_Steel_Tubes/links/55f78c3e08aec948c47042eb
  21. [21] Tarigopula, V., Langseth, M., Hopperstad, O. S., & Clausen, A. H. (2006). Axial crushing of thin-walled high-strength steel sections. International journal of impact engineering, 32(5), 847–882. https://doi.org/10.1016/j.ijimpeng.2005.07.010
  22. [22] Daneshi, G. H., & Hosseinipour, S. J. (2002). Grooves effect on crashworthiness characteristics of thin-walled tubes under axial compression. Materials & design, 23(7), 611–617. https://doi.org/10.1016/S0261-3069(02)00052-3
  23. [23] Kong, D., Meng, D., Gao, Y., & Yang, J. (2025). Crashworthiness of asymmetrical square tubes with unequal cells and various wall thicknesses under multiple load conditions. Construction and building materials, 458, 139637. https://doi.org/10.1016/j.conbuildmat.2024.139637
  24. [24] Ha, N. S., Lee, T. U., Lu, H., Li, J., Lu, G., & Xie, Y. M. (2024). Energy absorption characteristics of fractal multi-cell square tubular structures under axial crushing. Thin-walled structures, 205, 112365. https://doi.org/10.1016/j.tws.2024.112365
  25. [25] Baroutaji, A., Sajjia, M., & Olabi, A.-G. (2017). On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments. Thin-walled structures, 118, 137–163. https://doi.org/10.1016/j.tws.2017.05.018
  26. [26] Huang, X., Lu, G., & Yu, T. X. (2006). Collapse of square metal tubes in splitting and curling mode. Proceedings of the institution of mechanical engineers, part c: Journal of mechanical engineering science, 220(1), 1–13. https://doi.org/10.1243/095440606X78254
  27. [27] Zhang, Z., Guo, C., Wang, L., & Hu, D. (2024). Crashworthiness of bio-inspired hierarchical hybrid multi-cell tubes under axial crushing. Engineering failure analysis, 166, 108886. https://doi.org/10.1016/j.engfailanal.2024.108886
  28. [28] Wan, M., Hu, D., Zhang, H., & Zhang, Z. (2024). Energy absorption characteristics of TPMS-filled square tubes under quasi-static axial crushing. Thin-walled structures, 199, 111811. https://doi.org/10.1016/j.tws.2024.111811
  29. [29] Guo, H., Zhang, J., Li, J., Yuan, H., & Zhu, Y. (2022). Splitting and curling collapse of square sandwich metal tube with aluminum foam core under axial low-velocity impact. Journal of the brazilian society of mechanical sciences and engineering, 44(11), 514. https://doi.org/10.1007/s40430-022-03840-0
  30. [30] Dehghanpour, S., & Alavi, A. (2022). Experimental and numerical study of in-plane loading of thin-walled tubes with different section shapes and wall thickness. The international journal of advanced manufacturing technology, 15(3), 89–97. https://doi.org/10.30486/admt.2022.1948255.1330

Downloads

Published

2024-12-19

Issue

Vol. 1 No. 4 (2024): Mechanical Technology and Engineering Insights (MTEI)

Section

Articles

How to Cite

Mahmoodnezhad, M. . (2024). Experimental Investigation of Energy Absorption Characteristics of Square Thin-Walled Aluminum Tubes under Folding and Splitting Deformation Modes. Mechanical Technology and Engineering Insights, 1(4), 231-240. https://doi.org/10.48313/mtei.v1i4.72

Similar Articles

1-10 of 20

You may also start an advanced similarity search for this article.