Research Article

Nonlinear Low-Velocity Impact Analysis of a Rectangular Composite Plate Reinforced with Shape Memory Alloy Strips Based on Local and Instantaneous Phase Transformations

Authors

  • Rita De Fátima Muniz * Programa de Pós-graduação em Educação Núcleo de Avaliação Educacional, Federal University of Ceará, 60430-160 Fortaleza, Brazil.
  • Ramin Goudarzi Karim Department of CIS, Stillman College, Tuscaloosa, Alabama, USA.

https://doi.org/10.48313/mtei.v2i2.39

Abstract

In this paper, a nonlinear low-velocity impact analysis of a rectangular composite plate reinforced with Shape Memory Alloy (SMA) strips is conducted, and the effect of the impactor's energy on the impact response of the plate is investigated. In this research, in order to extract accurate results that can be utilized for the validation of future theoretical findings, the instantaneous changes and spatial non-uniformity of the austenite-to-martensite phase transformation (and vice versa) have been considered for the first time. Furthermore, instead of utilizing approximate plate theories, three-dimensional simulation has been employed to extract impact responses based on the theory of three-dimensional elasticity, the implicit result of which is the modification of the contact law. The analysis results demonstrate that the SMA, by forming a hysteresis loop during the impact, leads to a reduction in the energy absorbed by the composite plate; the result of this is an increase in the impact resistance of the composite plate and a reduction in the resulting damage. Moreover, the results indicate that by increasing the impactor's energy, the martensite fraction, contact force, and the deflection at the point of impact increase. The contact duration increases when the impact energy is increased by increasing the impactor's mass; however, it decreases when the impact energy is increased by increasing the impactor's velocity.

Keywords

Low-velocity impact Composite plate Shape memory alloy Local and instantaneous phase transformations
References (18)
  1. [1] Meo, M., Marulo, F., Guida, M., & Russo, S. (2013). Shape memory alloy hybrid composites for improved impact properties for aeronautical applications. Composite structures, 95, 756–766. https://doi.org/10.1016/j.compstruct.2012.08.011

  2. [2] Cantwell, W. J., & Morton, J. (1991). The impact resistance of composite materials—a review. Composites, 22(5), 347–362. https://doi.org/10.1016/0010-4361(91)90549-V

  3. [3] Qidwai, M. A., & Lagoudas, D. C. (2000). Numerical implementation of a shape memory alloy thermomechanical constitutive model using return mapping algorithms. International journal for numerical methods in engineering, 47(6), 1123–1168. https://doi.org/10.1002/(SICI)1097-0207(20000228)47:6%3C1123::AID-NME817%3E3.0.CO;2-N

  4. [4] Kim, E. H., Lee, I., Roh, J. H., Bae, J. S., Choi, I. H., & Koo, K. N. (2011). Effects of shape memory alloys on low velocity impact characteristics of composite plate. Composite structures, 93(11), 2903–2909. https://doi.org/10.1016/j.compstruct.2011.05.013

  5. [5] Paine, J. S. N., & Rogers, C. A. (1995). Shape memory alloys for damage-resistant composite structures. Active materials and smart structures (Vol. 2427, pp. 358–371). SPIE. https://doi.org/10.1023/A:1004692329247

Article Metrics

How to Cite

De Fátima Muniz, R. ., & Goudarzi Karim, R. . (2025). Nonlinear Low-Velocity Impact Analysis of a Rectangular Composite Plate Reinforced with Shape Memory Alloy Strips Based on Local and Instantaneous Phase Transformations. Mechanical Technology and Engineering Insights, 2(2), 68-81. https://doi.org/10.48313/mtei.v2i2.39

Similar Articles

1-10 of 62

You may also start an advanced similarity search for this article.