Energy and Exergy Analysis of Organic Rankine Cycle Driven by Solar and Waste Heat
Abstract
The growth of the world population and rapid technological advancement, especially in the industrial sector, have considerably increased energy demand. Conventional power generation has caused many social and environmental problems. Two main approaches to solving these problems are to use renewable energy sources, such as solar energy, and to recover waste heat from various processes. Solar energy is a potential alternative to traditional fuels for electricity generation due to its low environmental impact and wide availability in many parts of the world. In contrast, waste-heat recovery is critical for reducing energy losses and improving energy management. One way to make use of these energy sources is the Organic Rankine Cycle (ORC). The ORC is similar to the traditional Rankine cycle, except that organic fluids are used as the working fluid. In this study, energy and exergy analyses of a solar/waste-heat-driven hybrid ORC are performed for four working fluids and four waste-heat temperature levels. Power output, thermal efficiency, and energy and exergy efficiencies are compared under different operating conditions. The results indicate that toluene provides the highest net power output, the highest first-law efficiency of the whole System, and the second-law first- and second-law efficiencies of the cycle among the considered working fluids. The performance of Cyclohexane, MDM, and n-pentane is comparable.
Keywords:
Solar energy, Waste-heat recovery, Hybrid systems, Organic rankine cycles and energy and energy efficiencyReferences
- [1] Quoilin, S., Van Den Broek, M., Declaye, S., Dewallef, P., & Lemort, V. (2013). Techno-economic survey of Organic Rankine Cycle (ORC) systems. Renewable and sustainable energy reviews, 22, 168–186. https://doi.org/10.1016/j.rser.2013.01.028
- [2] Tchanche, B. F., Lambrinos, G., Frangoudakis, A., & Papadakis, G. (2011). Low-grade heat conversion into power using organic Rankine cycles – A review of various applications. Renewable and sustainable energy reviews, 15(8), 3963–3979. https://doi.org/10.1016/j.rser.2011.07.024
- [3] Chen, H., Goswami, D. Y., & Stefanakos, E. K. (2010). A review of thermodynamic cycles and working fluids for the conversion of low-grade heat. Renewable and sustainable energy reviews, 14(9), 3059–3067. https://doi.org/10.1016/j.rser.2010.07.006
- [4] Mahmoudi, A., Fazli, M., & Morad, M. R. (2018). A recent review of waste heat recovery by Organic Rankine Cycle. Applied thermal engineering, 143, 660–675. https://doi.org/10.1016/j.applthermaleng.2018.07.136
- [5] Saleh, B., Koglbauer, G., Wendland, M., & Fischer, J. (2007). Working fluids for low-temperature organic Rankine cycles. Energy, 32(7), 1210–1221. https://doi.org/10.1016/j.energy.2006.07.001
- [6] Bao, J., & Zhao, L. (2013). A review of working fluid and expander selections for organic Rankine cycle. Renewable and sustainable energy reviews, 24, 325–342. https://doi.org/10.1016/j.rser.2013.03.040
- [7] Tchanche, B. F., Papadakis, G., Lambrinos, G., & Frangoudakis, A. (2009). Fluid selection for a low-temperature solar organic rankine cycle. Applied thermal engineering, 29(11–12), 2468–2476. https://doi.org/10.1016/j.applthermaleng.2008.12.025
- [8] Imran, M., Usman, M., Park, B.-S., & Yang, Y. (2016). Comparative assessment of organic rankine cycle integration for low temperature geothermal heat source applications. Energy, 102, 473–490. https://doi.org/10.1016/j.energy.2016.02.119
- [9] Lecompte, S., Huisseune, H., Van den Broek, M., De Schampheleire, S., & De Paepe, M. (2015). Review of organic Rankine cycle (ORC) architectures for waste heat recovery. Renewable and sustainable energy reviews, 47, 448–461. https://doi.org/10.1016/j.rser.2015.03.089
- [10] Xu, B., Rathod, D., Yebi, A., Filipi, Z., Onori, S., & Hoffman, M. (2019). A comprehensive review of organic Rankine cycle waste heat recovery systems in heavy-duty diesel engine applications. Renewable and sustainable energy reviews, 107, 145–170. https://doi.org/10.1016/j.rser.2019.03.012
- [11] Saleh, B., Koglbauer, G., Wendland, M., & Fischer, J. (2007). Working fluids for low-temperature organic Rankine cycles. Energy, 32(7), 1210–1221. https://doi.org/10.1016/j.energy.2006.07.001
- [12] Papadopoulos, A. I., Stijepovic, M., & Linke, P. (2010). On the systematic design and selection of optimal working fluids for organic rankine cycles. Applied thermal engineering, 30(6–7), 760–769. https://doi.org/10.1016/j.applthermaleng.2009.12.006
- [13] Quoilin, S., Orosz, M., Hemond, H., & Lemort, V. (2011). Performance and design optimization of a low-cost solar organic Rankine cycle for remote power generation. Solar energy, 85(5), 955–966. https://doi.org/10.1016/j.solener.2011.02.010
- [14] Loni, R., Mahian, O., Markides, C. N., Bellos, E., Le Roux, W. G., Kasaeian, A., Najafi, G., & Rajaee, F. (2021). A review of solar-driven organic rankine cycles: Recent challenges and future outlook. Renewable and sustainable energy reviews, 150, 111410. https://doi.org/10.1016/j.rser.2021.111410
- [15] Arjunan, P. (2022). Selection of working fluids for solar organic rankine cycle—a review. International Journal of Energy Research, 46(14), 20573–20599. https://doi.org/10.1002/er.7723
- [16] Salem, M. S., Fahim Alavi, M., Mahariq, I., Accouche, O., & El Haj Assad, M. (2021). Applications of thermal energy storage in solar organic rankine cycles: A comprehensive review. Frontiers in energy research, 9, 766292. https://doi.org/10.3389/fenrg.2021.766292
- [17] Vaja, I., & Gambarotta, A. (2010). Internal combustion engine (ICE) bottoming with organic Rankine cycles (ORCs). Energy, 35(2), 1084–1093. https://doi.org/10.1016/j.energy.2009.06.001
- [18] Larsen, U., Pierobon, L., Haglind, F., & Gabrielii, C. (2013). Design and optimisation of organic Rankine cycles for waste heat recovery in marine applications using the principles of natural selection. Energy, 55, 803–812. https://doi.org/10.1016/j.energy.2013.03.021
- [19] Song, J., Song, Y., & Gu, C. W. (2015). Thermodynamic analysis and performance optimization of an organic rankine cycle waste heat recovery system for marine diesel engines. Energy, 82, 976–985. https://doi.org/10.1016/j.energy.2015.01.108
- [20] Shu, G., Yu, G., Tian, H., Wei, H., Liang, X., & Huang, Z. (2016). Multi-approach evaluations of a cascade-organic rankine cycle system driven by diesel engine waste heat: Part A—Thermodynamic evaluations. Energy conversion and management, 108, 579–595. https://doi.org/10.1016/j.enconman.2015.10.084
- [21] Scaccabarozzi, R., Tavano, M., Invernizzi, C. M., & Martelli, E. (2018). Comparison of working fluids and cycle optimization for heat recovery ORCs from large internal combustion engines. Energy, 158, 396–416. https://doi.org/10.1016/j.energy.2018.06.017
- [22] Nazari, N., Heidarnejad, P., & Porkhial, S. (2016). Multi-objective optimization of a combined steam-organic Rankine cycle based on exergy and exergo-economic analysis for waste heat recovery application. Energy conversion and management, 127, 366–379. https://doi.org/10.1016/j.enconman.2016.09.022
- [23] Stijepovic, M. Z., Linke, P., Papadopoulos, A. I., & Grujic, A. S. (2012). On the role of working fluid properties in organic Rankine cycle performance. Applied thermal engineering, 36(1), 406–413. https://doi.org/10.1016/j.applthermaleng.2011.10.057
- [24] Bellos, E., & Tzivanidis, C. (2018). Investigation of a hybrid ORC driven by waste heat and solar energy. Energy conversion and management, 156, 427–439. https://doi.org/10.1016/j.enconman.2017.11.058
- [25] Mahmoudi, A., Fazli, M., & Morad, M. R. (2018). A recent review of waste heat recovery by organic rankine cycle. Applied thermal engineering, 143, 660–675. https://doi.org/10.1016/j.applthermaleng.2018.07.136
- [26] . Bellos, E., Tzivanidis, C., & Antonopoulos, K. A. (2016). Exergetic, energetic and financial evaluation of a solar-driven absorption cooling system with various collector types. Applied thermal engineering, 102, 749-759. https://doi.org/10.1016/j.applthermaleng.2016.04.032
- [27] Bellos, E., Tzivanidis, C., & Antonopoulos, K. A. (2016). Exergetic and energetic comparison of LiCl-H2O and LiBr-H2O working pairs in a solar absorption cooling system. Energy conversion and management, 123, 453–461. https://doi.org/10.1016/j.enconman.2016.06.068
- [28] Tzivanidis, C., Bellos, E., & Antonopoulos, K. A. (2016). Energetic and financial investigation of a stand-alone solar-thermal organic rankine cycle power plant. Energy conversion and management, 126, 421–433. https://doi.org/10.1016/j.enconman.2016.08.033
- [29] Moran, M. J., Shapiro, H. N., Boettner, D. D., & Bailey, M. B. (2010). Fundamentals of engineering thermodynamics. John Wiley & Sons. https://www.wiley.com/en-us/shop/general-introductory-mechanical-engineering/fundamentals-of-engineering-thermodynamics-9th-edition-p-9781119391388
- [30] Bellos, E., & Tzivanidis, C. (2018). Investigation of a hybrid ORC driven by waste heat and solar energy. Energy conversion and management, 156, 427-439. https://doi.org/10.1016/j.enconman.2017.11.058