Research Article

Analytical Model for Anchor Loss Q-Factor of an Elliptical MEMS Resonator with Two Supporting Beams

Authors

  • Khadije Ghaziyani Departement of Mathematics, Ayandegan University, Tonekabon, Iran.
  • Mehdi Moslemi * Department of Mechanical Engineering, Ayandegan Institute of Higher Education, Tonekabon, Iran.

https://doi.org/10.48313/mtei.v1i2.52

Abstract

Anchor loss is a primary energy dissipation mechanism limiting the quality factor (Q) of micromechanical resonators. This study presents analytical relationships for the natural frequency and anchor loss quality factor of an elliptical micromechanical resonator with two horizontal supporting beams operating in the in-plane slapping vibration mode. The model was developed using Euler-Bernoulli beam theory, where equivalent stiffness and effective moment of inertia were derived from the kinetic energy of the bending beams. The analytical natural frequency (32.528 kHz) showed excellent agreement with ANSYS simulations (31.39 kHz), with an error of only 3.5%. Parametric analysis revealed that increasing beam length improves the quality factor, while increasing beam width or the major radius of the ellipse significantly degrades it. The proposed analytical model provides a validated, computationally efficient tool for designing high-Q elliptical Micro-Electro-Mechanical Systems (MEMS) resonators. 

Keywords

Anchor loss Elliptical resonator Quality factor In-plane slapping mode Micro-electro-mechanical systems
References (24)
  1. [1] Eom, K., Park, H. S., Yoon, D. S., & Kwon, T. (2011). Nanomechanical resonators and their applications in biological/chemical detection: Nanomechanics principles. Physics reports, 503(4), 115–163. https://doi.org/10.1016/j.physrep.2011.03.002

  2. [2] Imboden, M., & Mohanty, P. (2014). Dissipation in nanoelectromechanical systems. Physics reports, 534(3), 89–146. https://doi.org/10.1016/j.physrep.2013.09.003

  3. [3] Gibson, B. A. (2016). Studying energy loss mechanisms in mems based contour-mode resonators using laser doppler vibrometery [Thesis]. https://escholarship.org/uc/item/2zz1w11r

  4. [4] Liu, W., Lu, Y., Chen, Z., Jia, Q., Zhao, J., Niu, B., … & Yang, F. (2023). A GHz Silicon-based width extensional mode MEMS resonator with Q over 10,000. Sensors, 23(8), 3808. https://doi.org/10.3390/s23083808

  5. [5] Chen, S. Y., Liu, J. Z., & Guo, F. L. (2017). Evaluation of support loss in micro-beam resonators: A revisit. Journal of sound and vibration, 411, 148–164. https://doi.org/10.1016/j.jsv.2017.08.048

Article Metrics

How to Cite

Ghaziyani, K. ., & Moslemi, M. . (2024). Analytical Model for Anchor Loss Q-Factor of an Elliptical MEMS Resonator with Two Supporting Beams. Mechanical Technology and Engineering Insights, 1(2), 111-121. https://doi.org/10.48313/mtei.v1i2.52

Similar Articles

1-10 of 62

You may also start an advanced similarity search for this article.